If you’ve been getting a faint sewer smell from your bathroom, or your toilet feels a little wobbly when you sit on it, your wax ring is probably worn out.
The good news is you don’t need to call a plumber right away. Replacing a wax ring is simple, and using a combo kit makes the whole job even easier.
What’s included in a wax ring combo kit
A good combo kit comes with everything you need in one box:
- Thick, long-lasting wax ring
- Mounting bolts, nuts, and washers
- Retainer clips for stable installation
No extra trips to the store, no guessing which parts you need.
Step-by-step installation
1. Prepare the toilet
Turn off the water supply, flush the toilet to empty the tank and bowl, then disconnect the water line.
Remove the plastic caps on the base bolts, loosen the nuts, and carefully lift the toilet off the floor.
2. Clean the drain area
Remove the old wax ring and wipe away any dirt or residue. A clean surface means a better seal.
3. Install the new wax ring
Place the new wax ring over the floor drain, making sure it’s centered. No glue or extra tools required.
4. Reinstall the toilet
Lower the toilet back onto the wax ring, line up the bolts, and press down firmly. The wax will compress and create a tight, waterproof seal.
5. Secure and test
Use the included hardware to tighten the bolts gently. Reconnect the water, fill the tank, and flush a few times to check for leaks.
If there’s no dripping and no smell, you’re done.
Why use a combo kit
A combo kit saves time, reduces mistakes, and gives you a clean, professional installation. It’s the most practical choice for homeowners, renters, and even small contractors.
Quick tips
- Always use a new wax ring when removing a toilet.
- Don’t reuse old rings — they won’t seal properly.
- If the toilet still wobbles, check for uneven flooring.
A quality wax ring combo kit is one of those small but essential parts that keep bathrooms working smoothly for years.
EN
