EN
Have you seen any strange leaks or smelled anything unusual from your bathroom? It probably is a wax ring leak. Every household device comes with its own set of challenges, and toilets are no exception. In this guide, you will learn how to repair your toilet with a toilet wax ring replacement kit.
What is a Toilet Wax Ring?
It's a seal that is placed under the toilet bowl. Its purpose is to prevent gunk and nastygases from the drain to escape. Performing regular maintenance and checking the bathroom fixtures will mitigate expensive repairs in the future. Components like wax rings may fail due to neglect and aging, temperature changes, or because it was poorly installed.
Tools and Materials You Need
Before heading out to the store, ensure you have everything ready.
- Toilet wax ring replacement kit
- Putty knife
- Pocket or socket wrench set
- Bucket
- Towels
- Disposable gloves
Having these materials will help perform the installation as quickly and efficiently as possible.
Setup Instructions
Disabling Water Supply: Please pause everything; this is similar to getting ready for the dentist’s appointment. This toilet does come equipped with a valve that permits cessation of water flow.
Draining Water From The Toilet: Some undignified aspects of the task can be done through toilet flushing intervals. To ensure the tank is optimally conditioned, scrubbing the bowl and drying out the tank helps minimize water level retention.
Lift And Disassemble The Toilet: Part of the steps in disassembling the toilet includes lifting it, which involves unbolting the securing nuts. After disconnecting the water supply line, loosening the rest room fixtures and removing excess bolts will allow for easy lifting of the toilet.
Extracting Garbage From The Flange: The removal of leftover wax from the set’s seal can be expedited with a putty knife used to scrape debris and wax seal remnants.
New Wax Rings Installation: For this step, we need to set it on top of the toilet flange. If you followed the instructions marked on previous steps, the plastic horn should be facing up, ready to be engaged.
Installation of the toilet: This is the explanation that made possible for you to rest the toilet over the wax ring and bolt it from below the toilet. Now, a bit of downward force combined with some rotation on the toilet to compress the wax seal even further will now do quite a lot of good.
Toilet shall be secured now: Gentle snugging up of the already released nuts with the porcelain nuts to bolts underneath the toilet should be done. Make sure you do not pass the threshold where porcelain would shatter into pieces.
Reconnect the Water Supply: After fitting the toilet, the next step is joining the supply line and turning on the supply. Just like before, wait for the tank to fill and listen for any leaks at the base joint.
Maintenance Tips
Routine observations for gaps, odd tilting, unusual smells, wobbling, leaks, and peculiar sounds could preserve a toilet’s wax ring. Instead of waiting until the toilet becomes overbearing, it is better to schedule repairs ahead of time, and address maintenance concerns promptly. In short, timely action vs overdue action is always a good idea.
Trends and New Developments
The production of toilet wax rings is intrinsically influenced by eco-friendly purchases. In addition to producing eco-friendly toilet wax rings, more innovative toilet wax rings are being produced because of advancements in technology over time. Homeowners get greater plumbing service value due to better fulfillment of their requirements.
